How To Clean A Stained Silicone Bong

Bongs tin become notoriously dirty and stinky. The resin that builds up on the inside of your bong is a tarry mess and tin can be extremely hard to clean. Some have turned to harsh chemicals (like carburetor cleaner) to remove the crud but this tin leave a dangerous rest that is toxic when heated.

Instead, employ some natural ingredients and a bit of elbow grease to become your bong spic and span clean.

Why Y'all Should Clean Your Bong Regularly

Source: Grasscity.com

Taste

A big function of the marijuana experience is the taste of your favorite ganja going down.

You might non think smoke has a taste, merely it does. Simply like everything else you put in your oral fissure, molecules from decarboxylated weed interact with the taste buds on your tongue to produce all different kinds of flavors.

You might non experience a rush of taste like you do when you pop a Jolly Rancher in your mouth, but the season is still there nonetheless.

Matter is, when you don't clean your bong, the resin, slime, filthy bong water, and every other source of uncleanness start to give off a flavor of their own. And that flavour is not good.

If you've ever accidentally eaten a bad love apple, that's the taste you can wait to experience if you don't clean your bong. It'll make you want to wash your oral cavity out with soap.

The longer you avoid cleaning your bong, the worse information technology volition get.

Smell

Smell is ane of the start signs you'll find that indicates information technology's time to clean your bell.

Whether it comes from buildup on the walls of your bong or the stagnant water in the lesser, information technology's going to odor bad. And when nosotros say bad, we hateful swamp-water-and-ashes bad.

We don't know near y'all, but we've never found swamps specially good-smelling in the first place. We certainly wouldn't want to bring one into our dwelling house.

That's exactly what yous're doing when you don't clean your bong: creating a festering swamp of stink that will permeate the walls, the carpet, the furniture, and even your apparel.

Avoid the foul odors by rinsing your bong regularly.

Bacteria

Bacteria is the big offender when it comes to reasons why you should clean your bell more than often.

Later on only 22 hours, bacteria of all sorts begin growing inside a dirty bell. And it simply gets worse over fourth dimension.

If you don't think that sounds so bad, in extreme situations — we're talking severely dirty bongs — necrotizing pneumonia is a very real possibility.

Notice the word 'necrotizing'? That means that some of your lung tissue dies. Ouch!

Don't risk severe medical bug. Just make clean your bong.

Difficulty

Another good reason to clean your bong more than frequently is that it becomes more difficult over time. The longer you lot await, the harder y'all're going to have to scrub.

If you've ever had to break out the steel wool to get your dinner dishes clean, that's what you'll have to face the longer y'all delay cleaning your bell.

The matter about washing a bong is you can't become your hand down in in that location to actually scrub.

Non only volition you lot accept broiled-on resin to contend with, but you lot besides won't be able to accomplish it with conventional tools.

That'southward a recipe for cleaning disaster (and lots of colorful swear words).

Simply if you clean your ganja gear on a regular footing, it will be infinitely easier to remove the resin, grime, and filth that builds in your bong with every use.

Which would yous rather do: spend several hours trying to make clean your bong with harsh chemicals or rinse information technology with hot h2o for several seconds?

We'll take the latter option every time.

How Frequently To Clean Your Bell

Heavy Smokers

For heavy smokers, we recommend cleaning your bell at to the lowest degree every 48 hours.

The heat and smoke from regular use will slow the growth of harmful bacteria, but only upward to a point. Eventually, nothing you practise short of removing the bacteria from your bell will forbid it from getting into your lungs.

So if you smoke a clean bong starting time matter Monday morn, launder the heck out of that affair after your first smoke Wed morning (48 hours later on).

Alternatively, you could only clean your bell every second mean solar day before going to bed so it's ready to become when yous wake up in the morning time.

For example, if you smoke a make clean bong first thing Monday forenoon, launder the remainder out Tuesday dark before you hit the sack.

Wake upwards Midweek, toke to your middle'southward content, and then launder the bell again before bed Thursday night. Echo advertizement infinitum.

Eventually, it will become habit and yous'll do it without even thinking about it — which is adept because you'll exist stoned out of your gourd.

Coincidental Smokers

Casual smokers should clean their bongs after every apply.

It seems counterintuitive that heavy smokers can clean their bong less, but it all comes back to leaner growth.

Coincidental smokers often go days between one smoke sesh and the side by side. When you don't discipline the bacteria to oestrus and smoke every few hours, information technology has plenty of time to grow and become stronger.

If you're planning on toking ane, ii, or three times a week, clean your bell after every utilize.

You'll avert the result of bacteria growth entirely and enjoy expert flavors and aromas every fourth dimension.

Signs That Yous Should Clean Your Bong Immediately

Slimy Film

The slimy moving picture that coats your bong after several uses is the perfect place to grow fungi and bacteria.

As we mentioned earlier, bacteria is extremely harmful if plenty of it gets into your lungs.

Fungi (a.k.a. mold) is besides no good when it comes to your lungs and respiration. Certain fungi tin can cause medical problems, not to mention kick your allergies into high gear.

Resin Build Upwards

Dealing with resin is a fact of life for the regular bong user. Information technology builds up in all sorts of hard-to-achieve places and tin seriously impact the taste, olfactory property, and overall experience of your marijuana.

If you run across a slight discoloration and a thin layer of stickiness anywhere on your bong, follow the instructions below to remove that resin from the inside of your piece.

If y'all neglect the resin buildup too long, information technology could actually adhere permanently to the surface of your bong. No thing what y'all practise subsequently that, you lot won't be able to remove all the resin. Your merely recourse will be to discard the bell and get a new ane.

Dark-brown, Stinky Water

Fifty-fifty if you leave make clean water in your bong for a few days, it will eventually grow stagnant and turn dark-brown and stinky.

Remember the swamp analogy we used above? This is it in a nutshell.

Smoking a bowl or two without changing the water in-between but accelerates the stagnation process because yous've introduced smoke and other impurities into the mix.

Yes, that's the water'south task — to filter out some of the harshness of the pot fume — but those impurities build upward over fourth dimension. The water will first to odor and will become a breeding ground for leaner.

Nobody wants to hit a bong total of swamp water. Who knows what else they'll be animate in?

Dump your bong h2o after every use and replace with fresh water the adjacent time around.

White Or Black Specks

White or blackness specks on the inside of the bong betoken ash build up. If not removed on a regular ground, this ash forms "chunks" that you tin can accidentally dislodge and inhale if you're not careful.

And simply as it sounds, pieces of ash in your lungs is never a good thing. Scrub that ash off your bong and avoid the trouble birthday.

How To Clean A Bell: The Ultimate Guide

Cleaning a bong may seem like a daunting job. And in some respects, it is. Information technology's not like you tin can get your mitt down in there to scrub out all the gooey mess. But just because it's daunting doesn't mean it shouldn't be done.

In this department, we'll tell you everything you need to know to go your bong spic-and-span clean like the twenty-four hours you lot bought it.

Here'south what y'all'll need:

• Hot h2o
• Rubbing booze
• Salt
• Cotton balls
• Q-tips
• Mitt towels
• Small-scale Ziploc numberless or tupperware containers with lids
• Canteen brush or pipe cleaners (optional)

Now that you've assembled all your supplies, here's a step-past-step guide for how to clean your bong.

Source: Shanti.eu

1) Dump Out The Dirty Bong H2o

You'd call up this would exist a given and non worth mentioning, but the simplest thing can exist overlooked when yous're flying in a blue dream. We want to be thorough and then hither'southward your reminder:  dump out the bong h2o kickoff.

ii) Take Autonomously Your Bong

Dissever the bowl and the stalk from the bong proper. If your bowl and stem are two pieces, split those also. If your bong has any other movable or removable parts, guess what? You need to take those apart too. Your bell should now be completely disassembled.

iii) Rinse Everything With Hot Water

Hot running water is a great manner to commencement the cleansing process. It dislodges some of the surface resin that has built upwardly with repeated use and starts to dissolve the bonds that bind the gunk in place.

Get the water as hot as y'all tin can tolerate and consider wearing dish-washing gloves (those ugly yellow things). The gloves permit you to make the water hotter which turbo-charges the process.

If you think about it while you're rinsing, make full from the top and empty from the slide opening. This will minimize the chances of the loose remainder getting caught anywhere else.

iv) Put Each Loose Piece In Its Own Container

And no, you don't desire to use the same baggies your weed came in. We're trying to clean things here folks. Tupperware containers with lids besides make for a great reusable, earth-friendly alternative.

And, no, you don't have to put the bell itself in a baggie or plastic container. We'll clean that past itself in a afterward stride.

Later you've got each loose slice in its own baggie or tupperware container, pour in at to the lowest degree ¼ loving cup of your rubbing alcohol along with at least one tablespoon of salt.

For larger pieces, go with ½ cup rubbing alcohol and 2 tablespoons salt. The proportions aren't really important, simply and then that both ingredients are there.

Chemistry Notation

Rubbing alcohol is mildly acidic which helps to breakdown the gluey resin that builds up inside the bong.

Salt is an abrasive that works in concert with the acid to add together scrubbing power to the solution.

As an culling to the rubbing alcohol, you can use vinegar which is also a mild acrid. Equally an culling to the common salt, you lot can use rice to help scrub the bong clean.

If you cull to utilize rice, don't allow it sit too long in the alcohol (or vinegar) considering information technology will starting time to blot the liquid and soften. This will decrease its abrasive power.

And if y'all practise decide to utilise rice, don't swallow it no affair how hungry you get. Those pesky (or awesome) munchies can brand you eat some really weird stuff. Resist the urge to make stir fry with the rice you use to clean your bong…no affair how delicious it looks

5) Shake

After yous seal the baggies or plastic containers, milk shake them vigorously. This moves the alcohol and the common salt through all the tiny curves and crevices and breaks up the marijuana resin that has gathered there.

When y'all think you've shaken enough, milk shake more. You lot may take to do this for at least v minutes to really dislodge the sticky mess.

If you've added plenty alcohol to completely embrace each piece, you can let them soak for 10 to fifteen minutes, and then come up back and shake some more. This is specially useful if y'all've built up layer upon layer of bell resin from years of employ.

In one case the small pieces are clean to your satisfaction, set them bated (all the same in their baggies) and turn your attention to the main event: the bong itself.

6) Cascade Salt In The Bong

Source: Spoonuniversity.com

Add together at to the lowest degree ii tablespoons of salt into your bell ; three would be better. Depending on the size of the pipage you're using, you may want to add four or five.

Call up, salt will dissolve in liquids, so put enough common salt in the bong that some stays out of solution (not dissolved). This helps increase the abrasiveness of the solution you're making.

7) Cascade Booze In The Bell

Pour at least ½ cup of rubbing booze into your bong. Over again, depending on the size of the pipe itself, you lot may demand to add together more than. Don't worry well-nigh the ratio of common salt to booze. It really doesn't make whatever deviation every bit long as there's plenty of both to go a good swishing going.

8) Plug The Holes

Using the paw towels, plug all the holes in your bong. You tin also use plastic wrap and rubber bands to seal the holes. If the holes are small enough, yous could likewise utilise cotton wool assurance. If you really wanted to get fancy, you could purchase a few chalice stoppers from your local beaker store.

If you alive in an area with no beaker store (nosotros feel pitiful for yous), just identify one mitt over the mouth and one mitt over the hole where the stalk goes. Don't forget to put a finger over the carburetor pigsty.

nine) Milk shake

Merely like you lot did with the small pieces in their baggies, shake the bell vigorously so that the alcohol and salt solution gets moved around on all surfaces. Keep to milk shake the whole matter for at least five minutes. Then shake longer.

While you're shaking the bong, you tin can be satisfied that you got your exercise for the twenty-four hour period. Who knew shaking would be such difficult work?

x) Rinse Everything With Hot Water

Remove the minor pieces from their baggies and dump the alcohol/table salt solution from the bell. Rinse everything with the hottest water y'all can get.

Rinsing helps to remove the rest resin, the table salt, and the alcohol from the surfaces of your bong. If some stubborn pieces remain (particularly in the bowl or the stalk), use a Q-tip or a bottle brush (probably available at your local chalice store) to pick away at the mass.

After you lot remove that last little slice, rinse once more with hot water and let everything air dry before using over again.

11) Echo (Optional)

If it'south been years or since last you lot cleaned your bell (first, ewww), you may have to echo the entire process again (or fifty-fifty several times). Somewhen, the booze, the table salt, and the repeated agitation will peel away the layers of goo to reveal the sparkling glass underneath.

Preventative Maintenance

The above process can take some fourth dimension, especially if you've gone a while without cleaning. To avoid a difficult mess, clean your bell regularly (as in later every use) rather than once a calendar month or longer.

And before you lot say, "No way," cleaning afterwards every apply is as simple every bit rinsing with hot water because you don't take all the gook built up from repeated use. Cleaning it like this will drastically reduce the time you spend on this activity.

Think well-nigh it this way: would you lot rather spend three minutes or less cleaning your bong after each use (y'all're washing pizza plates anyway) or an hour or more after a few weeks of resin build-upwards? The answer seems obvious to us.

Here are another tips to brand keeping your bong an easy job.

1) Use Vinegar Or Lemon Juice For Hard Water Stains

Source: Rd.com

Difficult water stains tin can be difficult to remove, especially from the inside of a bong. What'due south more, they make your bong look muddied even when it'south non.

To gainsay the build upwards hard water stains, cascade some vinegar into the basin of your bong and classy for a minute or two. For added cleaning, allow the bell sit with the vinegar in the bottom for a few minutes after you're done swishing. Finally, rinse with hot h2o and let the whole matter air dry.

Another method for combating hard h2o stains is lemon juice and hot water. Combine the hot water and lemon juice in the bowl of your bong and and so swish. Let information technology sit for a few minutes and then rinse with hot h2o.

2) Add Ii Drops Of Lemon Juice To The Water While You Fume

Source: Nutritionsecrets.com

Fresh lemon juice contains enzymes that intermission downwards the gooey resin that builds up on the within of your bong. Adding just two drops to the water you employ while smoking, prevents the gunky mess from forming. The lemon juice besides helps kill the disgusting bong water smell and keeps things fresh.

It only takes a few drops to reach the desired effect. In this case, more is not ameliorate. As well much lemon juice will start to overpower the flavors of your favorite strain . Two minor drops is enough.

3) Store Your Bong Empty

Once more, this may seem like mutual sense, but we desire to be sure and cover all our bases. Afterward you lot've come down from your date with Mary Jane , just empty your bell and rinse it out as outlined in a higher place. This will go on everything make clean and tidy and ready for your next smoke.

Putting It All Together

Cleaning your bong doesn't have to be a major undertaking and you don't have to use specialized cleaners with all kinds of toxic chemicals. Merely a quick rinse with a few natural ingredients afterward every employ (or every other use) will accept your bong sparkling and crystal clear equally the day you lot bought it.

For more data on all things cannabis and to bank check out our 100-percent all-natural marijuana products, visit HonestMarijuana.com today.

Source: https://honestmarijuana.com/how-to-clean-a-bong/

Posted by: kleinofteemontly.blogspot.com

Share this post